Level 2 Chimney Inspection Cost in CT

Level 2 chimney inspections in Connecticut typically run $250–$500. That’s a lot more than a basic Level 1 visual, but it’s buying you the interior video scan and comprehensive documentation NFPA 211 requires. (Not sure you need one? See when do you need a Level 2 inspection.) Here’s exactly what drives the number.

Typical CT Pricing (2026)

Basic Level 2 — $250–$350

Single-flue chimney, standard access, single-story or accessible two-story roof. Interior video scan, written report, photo documentation.

Standard Level 2 — $350–$450

Multi-flue chimney, more complex access, higher chimney. This is where most real-estate inspections land.

Complex Level 2 — $450–$500+

Difficult roof access, multiple chimneys, historic homes requiring extra documentation, or rush scheduling for closings.

What Drives the Cost

1. Chimney complexity. Single-flue simple masonry chimney is fastest. Multi-flue (two or three flues sharing one chimney) requires scanning each flue separately.

2. Roof access difficulty. Walkable ranch roof is quick and safe. Steep three-story Victorian requires roof jacks, harnessing, and often extra insurance premium.

3. Chimney height. Longer flues take more scan time and more careful documentation.

4. Rush scheduling. Same-week or next-day inspections for real-estate closings may carry a modest premium.

5. Location within our service area. Chimneys in far corners of our service area (outer Litchfield County) may include a small travel surcharge.

What’s Included

Every Level 2 inspection from West Hartford Chimney Repair includes:

• Level 1 visual check of all accessible parts
• Interior video scan of every flue, top to bottom
• Attic and basement passage inspection where accessible
• Building materials check adjacent to the chimney
• Written report with pass/fail on each NFPA 211 checkpoint
• Photo documentation of any findings
• Video recording available on request
• Recommendations categorized as urgent, recommended, or optional
• Turnaround within 24–48 hours (same-week for real-estate)

What’s Not Included

• Sweeping the flue (this is inspection only; sweep is a separate service)
• Repairs (findings are documented; any repair work is quoted separately)
• Level 3 (invasive) inspection if the Level 2 findings require deeper investigation

Real-Estate Inspection Timing

For CT real-estate transactions:

• Book as soon as you know the home is going under contract
• Standard turnaround: 3–5 business days from booking to report
• Rush turnaround: 24–48 hours (limited availability, may carry small premium)
• Report format meets standard buyer/inspector expectations

Why Some CT Companies Charge Less

If you see quotes under $200 for a “Level 2 inspection,” look carefully at what’s actually included. Common shortcuts:

• No actual video scan (visual check with a mirror does not qualify as Level 2 per NFPA 211)
• No written report (verbal findings only)
• No photo documentation
• Rushed 15–20 minute visit instead of the 60–90 minutes a proper Level 2 takes

Cheap Level 2 inspections often lack the documentation buyers and inspectors expect. If a closing depends on the report, you need the real thing.

Financing Note

Level 2 inspections are typically out-of-pocket, not financed. Larger scope work (repairs, relining, rebuilds) identified during the inspection can be financed through Synchrony.

Book Your Inspection

Ready to schedule? See our chimney inspection service or contact us. Same-week and rush real-estate scheduling available.